02-03-2008, 08:52 PM
Alright fellow Foci owners i have two questions that are pretty simple to answer for some of you veterans. So i have a MAJOR lighting project i am taking on saturday in tenn with a friend. So i need to know how to get the door panels off completely and all the trim to get behind there so i can wire led's and led strips in the door pockets. Also i need to know how to get the foglights out so i can drill andhook up a set of strobes in them. Thanks again guys.
Here's a how-to on the door panel removal, http://www.focusfanatics.com/forum/showthread.php?t=138715, and if you just need to remove the small piece of trim next to the door sill, it just pops out, just be carefull not to break it
sorry, I know jack about the fogs
02-04-2008, 11:21 AM
What is the purpose of the strobes, to look cool? Also unless you put the strobe in where the light bulb goes, there is not much surface area to drill a hole into to put the strobe in. I have strobes in my headlights and taillights, but its because I'm a vol firefighter. In Indiana it is illegal to have emergency lights below your bumper...so the fog light area might be a no-go if thats what your looking to do.