Im getting ready to take my svt to be dynod after the 10psi FMIC Procharger install. My tuner said a MAFIA may be needed if I max my MAF out. Im using the top portion of my AEM CAI tubing (2.5" as is all my IC piping) with the MAF plate on it.

I understand how it "extends" the range of your MAF in different modes. Is this something im going to need? Other options? Or can I get away with my stock MAF

-Rick

Yes my opinion is a MAFia will be needed

Tom

I agree with Tom. I'm tuning one right now at 10psi..... he DEFINITLY needed the MAF'ia..... we're seeing over 4.5volt at WOT with the MAF'ia set on 2.

so looks like thats one more thing I need before I drive it round the corner to the dyno shop

My buddy is running a Procharger at 12psi on his 99 3.8 Mustang and had a DIABLOSPORT Mafia installed. He switched MAFS and is not using the MAFIA anymore... will that mafia work on my MAF?

I believe it will.

so looks like thats one more thing I need before I drive it round the corner to the dyno shop

My buddy is running a Procharger at 12psi on his 99 3.8 Mustang and had a DIABLOSPORT Mafia installed. He switched MAFS and is not using the MAFIA anymore... will that mafia work on my MAF?


If this is what he has I believe that yes, it will work: http://www.mcnewsautomotive.com/ProductInfo.aspx?productid=MAFIA

If this is what he has I believe that yes, it will work: http://www.mcnewsautomotive.com/ProductInfo.aspx?productid=MAFIA

p/n f7373

p/n f7373

Yes that is the correct part number...

I have MAFIA set up on 2, PC 8PSI pulley (making more then 9 at 7000) and my MAF_V max is around 4.56V

Deff get a Maf