06-24-2007, 02:14 AM
i was just wonderin which one gives you more horsepower and how much it increased it by, also which would be the cheapest one to get. and would i have to purchase anything else for the car after getting one or will it run good after just installing it??? thanks FF
06-27-2007, 04:30 PM
The ProCharger is capable of well over 300hp, however, you are limited by pulley sizes and belt slippage.
06-27-2007, 04:49 PM
so it adds 300+hp to the 170hp it already has. or it gives you a total of 300+hp. what type is the best and where could i get it installed at???
06-27-2007, 05:52 PM
The blower itself is capable of handling well over 300hp. I bought the 10psi kit and ended up with 284hp to the front wheels at 11.5psi. With the larger overdrive crank pulley that I bought I should be able to push around 310-320 front wheel hp. I could also add in a smaller blower pulley along with the bigger crank pulley, but then I'd get way too much belt slippage.
06-27-2007, 06:14 PM
I went from around 150whp to well over 360whp with my turbo setup..... then the pistons decided they didnt want to play anymore.
06-27-2007, 07:33 PM
so how much did everything cost you and where did you get it installed at. would i need better pistons for my car after it is installed????
06-28-2007, 09:02 AM
not really, unless you are planning for going over ~330whp
06-29-2007, 06:46 PM
You would have to check into shops in your area. It's probably going to be very expensive.
06-29-2007, 07:49 PM
Whats the PSI running on the kit that comes from CFM? cause i'm wanting to run 10 or what xarmyfocusx is doing.
06-30-2007, 01:08 AM
A turbo is much more efficient than the Procharger...
army is running the 10psi procharger kit...
06-30-2007, 01:21 AM
best bang for the buck and most hp per dollar will probobly be the powerworks kit. not to mention it claims to only take about 6 hrs to install with normal mechanical sense in your driveway with average tools.
06-30-2007, 01:48 AM
He has a SVT.. the procharger will make more per dollar on the SVT than the Powerworks..
06-30-2007, 08:48 AM
6h install time maybe for Procharger...but definitelly NOT for Powerworks ;)
(I installed/helped both)