03-14-2007, 08:50 PM
Ok so i have an 04 svt and I was wondering where exactly is the transmission fluid fill/check plug on the transmission (a picture would be great). I think i'm looking at the right plug, but when i take it out the trans fluid starts coming out and Im pretty sure it shouldnt and I should be able to stick me finger in and check the level like a diff. The reason I ask is because I just got a clutch put in and I threw it up on a rack to look over everything they did and that happened when I tried to check the fluid.
Here's the fill and drain plugs:
03-15-2007, 10:02 AM
Great pic ^^^ We get that question all the time. Finalley someone smart enough to get a pic...Thank you![thankyou] [thankyou]
03-15-2007, 05:52 PM
Thanks for the pic so should I fill it like a diff till it comes out the fill hole?
03-16-2007, 08:53 AM
what size hex key is needed?
03-16-2007, 10:39 AM
Thanks WD40! My Chilton's manual is useless.
03-16-2007, 10:43 AM
WD40 is an SVT Encyclopedia....haha, i'll be doing this on this upcoming weekend! I was just about to ask the same topic, but you guys beat me to it! Thanks for the reference pic....
05-03-2007, 11:20 PM
i know this is an old thread but just what i'm looking for. Does this same info also apply to the mtx75? And if when i take that front plug out (assuming it's the right one on the mtx75) and fluid comes out as soon as i take the plus out then that means it's got enough fluid correct? Does it matter if the transmission is hot or not?