ok i went and looked for some 50 weight oil. which should i get 5w50 or 20w50?

ok and the charge pipe isnt going to quite fit. should i move the maf closer to the throttle body so i can put it on the side of the pipe or should i cut a notch out of one of the ribs on the bottom of my hood. here is a pic...
http://i150.photobucket.com/albums/s98/tls_zx3/100_0552.jpg

what temp rtv sealant should i use one the downpipe to turbo. i cant find any any higher than 750, it seems like i should need like 1200+.

just let me know as soon as you can. i need to have this done soon.

thanks
tim

Cant help a lot as to where to place the MAF because im not there looking at it

No RTV or gasket is needed at the down pipe to turbo

Tom

Well, Tom had to cut my MAF bung area and weld it sideways so the hood would close.

As Tom said, I'm not there to see it, but perhaps that would be the idea. Just make sure you don't put the MAF in backwards.

well im just going to do the best i can on the placement of the maf. ill cut a notch in the hood 1st, see if i can get it to work. if i cant ill go up further with it and hope it wont make it to hard to tune

no sealant huh, thats weird seems like it would leak, oh well. makes it a lot easier on me, lol. i was having a hella hard time finding some.