Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum - View Single Post - Retro fit electric seats on a MK1 Ford Focus
View Single Post
Old 04-30-2013, 12:32 PM   #1
Focus Rookie
Join Date: Apr 2013
Fan#: 114157
Location: Milton Keynes, United Kingdom
What I Drive: MK1 Ford Focus 2003 Ink Blue

Posts: 2
FF Reputation: 1 Redux Good Standing Member
Buy-Sell-Trade Rating: (0)
Retro fit electric seats on a MK1 Ford Focus

I have just swapped fabric seats in my wife’s Ford Focus MK1 for leather electric seats. The electric seats allow for heating and up/ down movement. Luckily moving the seat forward and back is still manual.

If possible I would really like to wire up the seats for full functionality, but I’m not sure how to go about it. I guess I need switches for the heated seats that I could fit close to the seat height adjustment switch, but how I go about wiring it all up I don’t know.

In the electric seat I have a wiring block as per the attachment.

1 = Black & Red and Black
2 = Orange & Yellow and two black wires, one thicker than the other
3 = Green & Blue and Black
4 = Red & Green and Blue and Green
5 = Green & Blue and Blue and Black

I’ve checked under the centre consul and can’t see any wiring that might have been for the seats. The wiring block for the fabric seats is the same but I only have wiring for terminal 5.

Any help would be much appreciated. Thanks in advance!

Attached Thumbnails
Retro fit electric seats on a MK1 Ford Focus-.jpg  

Redux is offline  
    Reply With Quote