Originally Posted by Darketernal3
Ok... all done.
I did notice I'm getting bulb dip error still because of the passenger side... before you ask, yes, resistor and all the wiring is correct... and yes.. I tested it with a bulb to the side; and that gave out no errors.
The resistor alone doesn't seem to be a high enough impedance... unless of course you pair it with the harness...
Ok... Call me indecisive, but I ripped out my HID harness etc...
The lights angled down too much, the pattern was wavy, and the lights just way too blue.... Even with a 4300k bulb I didn't like the HID refraction pattern definition. Anyways, decided to go with the Phillips CrystalVision Ultra...
I'm 90% satisfied.... I guess I won't be 100% till I get projectors.