Proper Mach HID beam pattern?
Trying to aim my machs, problem is that the adjusters had "melted" somehow and i kind of have to jimmyrig them to adjust them. Was wondering if anyone can confirm how these things are supposed to look. Here's my current setup, car is on level garage about 12 ft from wall, top of horizontal tape line is 1" below center of HID projector, vertical line is dead cenrer. As you can see, the whole pattern favors the passenger side, and its pretty difficult to adjust that horizontally.
Passenger low beam only
Driver low only
Passenger high beam (HID and halogen)
Driver high beams
Mine: 2004 Subaru WRX Wagon: 116k, WRB
Gone: 2002 SVT, #1654
Hers: 2012 Focus Ti Sedan: 67k, SGM, Manual