So I'm considering drilling a series of holes in the bump in the plastic cover directly in front of the intake tube. I'm worried about water though. I hit it pretty hard with a hose just to see and some water got on that area. I was hitting it pretty direct though. I think I'll wait until it rains again then go for a highway drive and check it. Also, something has to be done about the tube that goes from the air box to the TB. I talked to a custom shop last week and we're looking at about $300+ for fab.
Current- 2016 Race Red Focus ST1
Traded In - Sedan Revolution #249 - 2012 SE Sport - ╠╬╝ - Ingot Silver - 201A - K&N w/ snorkel delete - Blox Type R Knob