Originally Posted by Darketernal3
Ok... all done.
I did notice I'm getting bulb dip error still because of the passenger side... before you ask, yes, resistor and all the wiring is correct... and yes.. I tested it with a bulb to the side; and that gave out no errors.
The resistor alone doesn't seem to be a high enough impedance... unless of course you pair it with the harness...
Yeah I have a feeling a number of these resistors aren't subjected to much quality control...
Mine just failed after I installed my new Morimoto stuff to replace the DDM crap. So that's another week or two wait on a video...