Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum - View Single Post - 2012 Titanium Front Strut Low Speed Noise (Clunk/Rattle)
View Single Post
Old 08-16-2012, 09:58 AM   #998
Focus Addict
Zillon's Avatar
Join Date: Jan 2005
Fan#: 17393
Location: Philthadelphia, PA
What I Drive: '13 JCW GP

Posts: 1,388
Points 2,854, Level 32
Points: 2,854, Level: 32 Points: 2,854, Level: 32 Points: 2,854, Level: 32
Level Up 70% Completed
Level up: 70% Level up: 70% Level up: 70%
Forum Activity 0%
Activity: 0% Activity: 0% Activity: 0%
FF Reputation: 27 Zillon Great Standing Member
Buy-Sell-Trade Rating: (3)
In my previous post, I forgot to mention that the base Focus strut mount could also be to blame by not evenly distributing the stresses from the strut bearing to the strut tower. So, I'll also be doing the ST top strut mount; I'm basically replacing the whole kit and kaboodle. It's a bit of a shot in the dark, but I'm also searching for a more performance-oriented suspension geometry (more camber, and maybe more caster), and the ST mounts are a different part.

Also, I have been searching, and to see if there's any similar issues between our cars and the Volvo/Mazda variants.

Ultimately, I've found that while some people have had strut bearing issues, it really doesn't seem to be as widespread an issue as with the Focus, nor is it an issue that many have from the factory. Some people have had premature bearing failures, but I've found that most people who do complain of strut bearing failure have altered their factory suspension with aftermarket components that they've installed themselves. zx3matt's girlfriend's car is an exception, though. I haven't really looked into the newer Skyactiv cars.
Joined the dark side.
Zillon is offline  
    Reply With Quote