Finally, Splash Guards On My SVTF
Finally got some splash guards on the car.
And, none too soon with the amount of sand they’re throwing on the roads.
You can see in the pics how beat up the leading edges of the fender lip and side skirts have already gotten.
Unfortunately, the molded guards from Ford will not fit the SVTF due to the side skirts,
and the different rear bumper.
Soooo, this is what I came up with.
Here’s the materials and tools required:
1) 3/8 Drill
2) Phillips Head Screwdriver
3) 7/64 Drill Bit
4) 3/16 Drill Bit
5) #8 X 1/2” Trim Screw (4)
6) #8 X 5/8” Trim Screw (12)
7) 2-Pair Splash Guards of your choice.
I chose the Carquest #82120 "Long Life Duraflex Splash Guards". Cheap, at $6.99 a pair.
Last edited by WD40; 01-04-2005 at 05:27 PM.