Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum - View Single Post - 2012 Focus Sedan dual exhaust
View Single Post
Old 01-28-2012, 12:47 PM   #229
Focus Fanatic
Join Date: Mar 2011
Fan#: 84403
Location: northeastern, NY
What I Drive: '01 ZX3, '14 Civic XL '12 SEL

Posts: 1,575
FF Reputation: 2 cobie56 Good Standing Member
Buy-Sell-Trade Rating: (0)
advice needed pls....
im attaching a twin tip exhaust on my car as i don't wanna go thru all the bother and expense of redoing the exhaust system for real dual exhaust look.
I see there is a bracket supporting the black part of the bumper valance....
has anyone had to deal w/ this bracket and if so, how'd u deal w/ it... I'm afraid it may get in the way of the twin tip exhaust may

yes, there is a bracket.. I installed a dual tipped exhaust to the stock muffler ... i cut off the tailpipe after it curved coming out of themuffler and welded the tip on... no other things needed... i also cut out a section of the valance w/ a knife (soft plastic) so the tip looked
more stock and nested into the bumper better . the tip comes very close to the valance bracket but does not touch should be fine.

Last edited by cobie56; 03-09-2012 at 08:46 AM.
cobie56 is offline  
    Reply With Quote