Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum - View Single Post - How to separate rear blinker from the stop on hatchbacks (2002-2005)
View Single Post
Old 11-25-2011, 05:05 PM   #71
Focus Fanatic
TerryB's Avatar
Join Date: Apr 2006
Fan#: 34559
Location: Riverside, RI
What I Drive: Red '01 ZX3

Posts: 2,921
Points 5,458, Level 47
Points: 5,458, Level: 47 Points: 5,458, Level: 47 Points: 5,458, Level: 47
Level Up 54% Completed
Level up: 54% Level up: 54% Level up: 54%
Forum Activity 2%
Activity: 2% Activity: 2% Activity: 2%
FF Reputation: 68 TerryB Excellent Standing Member
Buy-Sell-Trade Rating: (2)
I did mine about two years ago. I did all mine at the harness behind the left rear panel. I ran the reverse wire through a grommet on the bottom. Then just split the turn/brake wiring. It took alot of patience and most of a weekend. I have red LED's in the reverse sockets with resistors for hyper blink. I put 2x3 fogs in my Kaminari rear lip behind the mesh. I used the center brake light wiring for all stop lights. My conversion came out of nesessity. My brake lights were stuck on, so I cut the wires at the hazard switch and tapped the center brake wiring.

TerryB is online now  
    Reply With Quote