Okay, 20 years later and today was the first free day in awhile to wire up these badboys.
A quick addition to the how-to:
If you want to wire up a factory fog light switch, you will want to tap your fog light power into pin 83b. This will be the wire coming from pin 86 on the fog light relay. I tested each lead with a volt meter while turning the fog switch on and off. 83b was the only one that gave power when the fog light switch was pulled.
and....finally! I used cheap ebay fog-light houses. The old ones I got from a junk yard were yellowing beyond repair. These are nice and crystal clear, I also covered them in 3M clear bra material.
Camera makes it look like 14k HID's, but they're just the cheapest bulbs I could find.