I have 1 positive and 1 ground, since there is 16 leds, there are 4 to a series, so 4 of those are in parallel to each other. I just tinned the ends of the positive and negative wires and shoved them in the plug hahaha. I didn't want to cut the plug.
I'll see if I can get a perf board long enough from school. If not, I'll either order a perf board or design one and etch it. The latter being the cheapest cuz it's freeeeee! Just gotta make a workable design.
Sedan Revolution #150 Hatch Nation #26