Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum - View Single Post - Atco Raceway and Broken Axles
View Single Post
Old 12-16-2007, 02:22 PM   #40
Join Date: Sep 2006
Fan#: 38727
Location: NJ
What I Drive: 2004 Comp Orange SVT ZX5

Posts: 231
FF Reputation: 0 CompEuroZX5 Newbie
Buy-Sell-Trade Rating: (3)
Originally Posted by 1turbofocus View Post
I made 2 passes in the 10`s 40 to 50 in the 11`s hundreds in the 12`s

I still don't really see how you can say its a testament to the strength of the stock axles when only two very high 10sec passes were made. Again the 60fts on those passes were comparable to what a stock hp Focus can pull and the fact that only 2 passes were made at the "700hp +" power level really hurts the credibility of that claim.

Originally Posted by 03OrangeSVT View Post
I've beat on my axles for 2 years now without any issues.. running anywhere from 302whp to 365whp depending on the tune and boost at the time.

I dont run it at the strip... but I do get pretty rough with it.
Well since you don't run at the drag strip I can't imagine you stressing the stock axles. Even if you were to launch your Focus with sticky tires on the street it wouldn't be nearly as hard on the axles compared to launching at a well prepped drag strip. To prove my point look at the video below. 5500rpm 2 step launch and the axles didn't break. Why? Because it was on the street and the street doesn't hook like the track.

CompEuroZX5 is offline