Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum - View Single Post - Running without a sway bar endlink
View Single Post
Old 07-01-2007, 04:10 AM   #4
Focus Fanatic
Join Date: Nov 2003
Fan#: 1690
Posts: 8,262
Points 12,229, Level 72
Points: 12,229, Level: 72 Points: 12,229, Level: 72 Points: 12,229, Level: 72
Level Up 45% Completed
Level up: 45% Level up: 45% Level up: 45%
Forum Activity 0%
Activity: 0% Activity: 0% Activity: 0%
FF Reputation: 69 SkaAddict Excellent Standing Member
Buy-Sell-Trade Rating: (6)
Yeah, its not going to be very stable...I wouldn't take any sharp curves at anything over 10 MPH with the endlinks removed. Odds are that's your problem...a good test is to take the load off the front end and check the endlinks for play...if they're good they shouldn't move at all or very little at the most, when they're dead they'll wiggle all over the place. My passenger-side endlink was so shot that I was able to pull the ball out of the socket with little resistance. Shoot b16sir1991 a PM, he works at a Ford dealer and is a sponsor on here (Hillbish Ford in the affiliate forums.) I got a pair of factory links for $30 + S&H from him.
SkaAddict is offline  
    Reply With Quote